FixCalc app icon

Do-it-yourself flooring guide

FixCalc

Lay laminate flooring in your first room

Plan your first laminate project before opening the packs. Check the subfloor, measure the room, plan the first and last rows and buy the right quantity. Then follow the instructions for your laminate's locking system.

One room. A clear plan.Check → measure → buy → layCalculate full packs
Reviewed November 15, 2026Straight-row floating laminate in a rectangular indoor room

Check the room before you begin.

This guide is for a straight-row floating floor with click joints. It does not cover glued floors, stairs or herringbone. Choose a laminate suitable for the room and its heating system. Keep its current installation instructions beside you: the permitted subfloor moisture, expansion gaps, row sizes and joining method depend on the product.

Plan the first and last rows

See how the manufacturer starts the first rows.

Quick-Step Floors: How to get started with laminate flooring is the manufacturer's video linked from its straight-row installation guide. The source page is in English. The video supplements the instructions for the demonstrated system; it is not a substitute for your own product's manual.

The manufacturer's complete installation page also groups preparation, underlay, cutting and finishing resources. Match the demonstrated method to the boards you bought.

01

Check the subfloor before buying the materials.

Remove furniture and inspect the existing floor. The subfloor needs to be firm, clean, flat and dry to the limits in the laminate instructions. A soft underlay does not repair a loose or unsuitable base. Check moisture by the required method, rather than deciding that concrete looks dry.

Check the space beneath the door against the combined thickness of the new floor and underlay. Read the requirements for heated floors, existing coverings and transitions to other rooms. If the base needs substantial levelling, protection against moisture or structural repairs, resolve that first. Store and acclimatise the unopened packs in the conditions and for the period stated by the manufacturer.

02

Calculate the quantities for your shopping list.

For a rectangular room, multiply its measured length by its width. A 4 m × 5 m room has 20 m² of floor area. Keep units consistent. Measure recesses separately; do not count overlapping areas twice.

In this original example, the chosen extra flooring percentage is 10%, each pack covers 2.20 m², and the illustrative pack price is 31.50 in your currency. These are assumptions, not a required waste percentage, an actual product or a retail quote.

Shopping calculationExample result
Measured area4 × 5 = 20 m²
Area including selected extra20 × 1.10 = 22 m²
Whole packs22 ÷ 2.20 = 10
Flooring material cost10 × 31.50 = 315.00

Round a fractional pack result up. Choose the extra quantity for your actual cuts, layout and desired spare boards. List compatible underlay, any required moisture barrier, trims, transitions, spacers and delivery separately. For the full purchasing method, see how many flooring packs to buy; to compare suppliers, use the comparison of material costs using whole packs.

03

Calculate the last row before cutting the first.

Measure across the intended rows at several points: walls may not be parallel. Subtract the expansion gap required at both sides, then divide that usable width by the plank width. Check the leftover strip against the manufacturer's minimum edge-row width. If it is too narrow, reduce the first row so both edge rows have usable widths.

Here is an illustrative layout for the same 4 m room width, using hypothetical planks 22 cm wide and an assumed 10 mm expansion gap at each side. The expansion gap is chosen only to explain the arithmetic; use your product's actual requirement.

Width calculationResult
Usable width400 − 1 − 1 = 398 cm
Starting with a full-width plank18 × 22 = 396 cm; 2 cm left
Example with balanced edge rows12 + (17 × 22) + 12 = 398 cm

In the revised plan, both rows beside the walls are 12 cm wide. This avoids a final strip only 2 cm wide. Before cutting, check the layout against the product instructions, the opposite wall and door openings. A room-area calculator estimates purchase quantities; it does not plan board positions or cuts.

04

Prepare the tools and underlay.

Have a tape measure, pencil, square or straightedge, suitable saw, spacers and the joining tools specified for your click system. Use the saw's required eye, hearing and dust protection and a stable work support. Check for hidden electrical cables and pipes before any work that could reach into the base or walls.

Lay the compatible underlay as its instructions describe. If a vapour barrier is required, follow its overlap and sealing instructions. Do not add a second soft layer under a floor with an attached backing unless the manufacturer permits it. Keep the cutting area separate so debris does not get trapped beneath the floor.

05

Make the first rows straight and check each joint.

Inspect boards before fitting them and distribute their surface patterns deliberately. Set spacers to maintain the required expansion gap around walls and fixed obstacles. Use your planned first-row width and a straight reference line rather than trusting an uneven wall.

Join boards in the order and at the angle shown for your exact locking system. Some laminate boards connect at an angle; other boards use a different method to lock their short ends together. Do not force the boards together or hit their locking edges directly. Before continuing, make sure the first rows are straight, all connections are fully closed and the board edges are undamaged.

Offset the end joints in neighbouring rows by at least the distance your instructions require. Reuse an offcut only when its length and joint position are suitable. This is why having enough square metres does not by itself guarantee that every leftover piece can be used.

06

Leave space for the floating floor to expand.

Measure the final pieces individually, leaving the specified expansion gap at walls, door frames and pipes. Choose the cutting direction for your blade and test an offcut to check the decorative surface. Follow the manufacturer's details for transitions and any approved perimeter sealing.

Where space is limited, use the installation pull bar or another joining tool specified for the laminate. Remove spacers as instructed. Fit skirting and profiles using their intended fixings; do not pin the floating boards to the base or close their expansion space. Follow product-specific limits for fixed cabinetry and heavy permanent objects.

Clean up, inspect the joints and keep spare matching boards, the pack label and the receipt. Put furniture back carefully with suitable floor protection. A photo of the finished room and your recorded material quantities will also make a useful reference for the next project.

Can I finish the room in a weekend?

The fitting time is only part of the project. Acclimatisation, base preparation and drying can determine when installation may begin. Plan from the required conditions, not from a promised completion time.

Can FixCalc choose my cutting pattern?

No. Use the manual and your measured layout for board positions, joint offsets and cut sizes. FixCalc helps estimate materials and organise purchases; it does not replace the installation instructions.

Save your material estimate and shopping list.

Start with the free flooring calculator. In FixCalc, save the flooring estimate with your room project and check purchases off the shopping list. All four material calculators and complete results are free, with up to three saved estimates in one project. Pro Lifetime adds unlimited projects and saved estimates plus shopping-list PDF export.

Sources and example assumptions

These original calculations describe an imaginary room and laminate product. The chosen expansion gap, extra flooring percentage and prices are examples, not universal requirements. Follow the current installation instructions for your own product and the local requirements for the work.